Connect with us

NEWS

Plant-Inspired Waterproof Coating Arrives After the PFAS Ban

A plant-inspired waterproof coating from mill lignin landed 17 days after the EU capped PFHxA on clothes and food paper.

Published

on

A plant-waste coating published 27 October 2026 beads water like a lotus leaf, 17 days after Europe capped fluorochemical finishes on clothes and food paper.

Researchers at Washington University in St. Louis call the spray-on film SLIP, a plant-inspired waterproof coating built from lignin and fatty acids as a stand-in for PFAS, the forever chemicals used to make jackets and cartons shrug off water.

A Water-Beading Coat From Paper-Mill Lignin

Joshua Yuan is the Lucy and Stanley Lopata Professor and chair of energy, environmental and chemical engineering at WashU’s McKelvey School. His group developed a PFAS alternative called SLIP, short for superhydrophobic lignin-integrated particles, and reported it in the journal Matter on 27 October 2026.

First authors Puneet Dhatt and Weiwei Li built the particles by linking lignin, the stiff leftover from paper and pulping, to long fatty-acid chains, then locking them with a polylactic acid binder. The recipe copies suberin, the greasy polyester that lines xylem, the tubes that carry water through a plant.

Yuan, who also directs the NSF Carbon Utilization Redesign for Biomanufacturing center at WashU, has been mining plant chemistry to replace petrochemical materials. “We actually use this waste material to turn it into a valuable product,” he said.

SLIP defined: a fluorine-free particle coat, sprayed on, that self-assembles into a water-beading film on glass, metal and cotton.

  • The backbone: lignin, a cheap plant-waste polymer from mills and biorefineries.
  • The chains: fatty acids grafted on to cut surface energy the way suberin does in wood.
  • The glue: polylactic acid, a compostable binder that holds the particle film together.

Dhatt said tests show water bouncing off the finished surface. “The water will just run off,” he said. Co-authors include Yayun Chen, Xianzhi Meng, Mengqiao Liu, Chengcheng Fei, Arthur Ragauskas and Susie Y. Dai.

Clothing and Food Paper Lost Their PFHxA Finish in October

Carlo Antonini is a materials scientist at the University of Milano-Bicocca in Italy. He told colleagues the WashU film uses an interesting approach and that textiles would be one of the first sectors hit by PFAS limits, which made it a plausible stand-in. That door is already open.

Commission Regulation (EU) 2024/2462, adopted on 19 September 2024, inserted entry 79 into REACH Annex XVII. From 10 October 2026, PFHxA limits in clothing and food-contact paper apply to goods placed on the EU market for the general public.

PFHxA is undecafluorohexanoic acid, a short-chain fluorochemical used in water-repellent textile and paper finishes. The cap is 25 ppb for PFHxA and its salts, and 1,000 ppb for related substances, each measured in each homogeneous material, layer by layer rather than on a whole jacket.

THE EU PFHXA CLOCK

Product category Limit starts Cap in homogeneous material
Clothing, related accessories and footwear for the general public 10 October 2026 25 ppb PFHxA and salts; 1,000 ppb related substances
Paper and cardboard used as food contact materials 10 October 2026 Same two caps
Consumer mixtures, including waterproofing sprays, and cosmetic products 10 October 2026 Same two caps
Other consumer textiles such as carpets, curtains, upholstery and bed linen 10 October 2027 Same two caps

Personal protective equipment in several high-risk classes, medical devices and construction textiles sit outside those clothing rules. Goods already placed on the market before 10 October 2026 are also carved out. A wider EU PFAS restriction is still moving through the chemicals agency, so this short-chain cap is the one factories must meet now.

Yuan’s team is already looking at packaging, including inner linings, which puts the film on the same calendar as the food-paper rule. A water-beading coat is a start for a carton. It is not yet a grease barrier, and that gap matters more for food than for a rain jacket.

Why Only Stearate Makes Water Bounce

Only the longest fatty chain in the study, stearate, pushed the film into superhydrophobic territory, with lignin stearate coatings exceed 150 degrees of water contact angle on the finished surface. Shorter grafts made ordinary hydrophobic films that water still wets.

Han Zuilhof is an organic chemist at Wageningen University and Research in the Netherlands. He said the coat does not fight water the way PFAS does, through carbon-fluorine bonds. It builds a nanostructured surface full of tiny air pockets, so a droplet sits on air as much as on solid, the same trick seen on lotus leaves.

WATER CONTACT ANGLES BY FATTY ACID

Coating Water contact angle What the film does
Lignin octanoate 91.4 degrees Continuous hydrophobic film, not superhydrophobic
Lignin laurate 110.6 degrees Continuous hydrophobic film, not superhydrophobic
Lignin stearate exceeding 150 degrees Superhydrophobic; water beads and runs

That chain-length switch is why mill waste alone is not the product. The lignin backbone is chemically dull and cheap. The grafted fat sets the surface energy, and only stearate cleared the line that finishers treat as true water beading. Independent chemists described the water resistance as in the same band as PTFE-style finishes, with extra hold-up to limescale and rubbing in the WashU tests.

Zuilhof also flagged the waste story. “They’ve basically turned a waste product into something valuable, and that’s quite cool,” he said. He expects other groups to hunt different waste streams for the next bio-based coat.

Heat, Oil and Fire Are Still Missing

PFAS earned its factory role by doing several jobs at once: water, grease, heat and, in some recipes, flame. SLIP, as published, does one of those jobs well. Yuan’s group was blunt that this is not the full PFAS list, and the next lab work is to make the film oil-proof and fireproof.

WHAT SLIP CANNOT DO YET

  • Oven heat: Thermogravimetric tests show the particles breaking down above 180°C in air as the stearic chains fail, which keeps bakeware off the list.
  • Grease and oil: The published coat is a water film; oil-proofing is the stated next attribute, so can linings and greasy food wraps are still a research target.
  • Flame: Fire protection was one of the manufacturing uses WashU listed for PFAS, and it is not a claimed property of SLIP.
  • Mill scale: The particles were spray-coated on lab coupons of cotton, aluminum and glass, not yet on a finishing line.

Those limits sort the market more cleanly than a generic “Teflon alternative” headline. A rain shell and a paper cup need water to roll. A fryer pan and a fire-suppression foam do not. Outdoor clothing is the use that already lost its PFHxA finish in the EU. Food packaging is on the same date for paper and board, but only for the water-and-grease job if the film can later block oil.

Scale-Up Runs Through Biorefineries and Pulp Mills

The practical bet is not a new chemical plant. Lignin already comes off pulp lines and biorefineries as a low-value stream, often burned for heat. Yuan’s group wants to graft the fatty chains onto that stream and run the coat next to existing paper and pulping kit, with funding from the NSF CURB engineering research center and U.S. Department of Energy biomass grants.

Dhatt noted that lignin and fatty acids “evolved to degrade in the environment for a long time.” In the paper, the team fed the particles to a wood-rotting fungus in a lean medium for two weeks, after some samples had their ester bonds clipped with alkali. Compost, they wrote, should be a richer breakdown setting than that conservative flask test.

WHAT WE KNOW

  • Substrates: Spray coats formed on cotton, aluminum and glass in the lab, with water bouncing in video stills from the Yuan lab.
  • Stability claims: The Matter paper reports pH stability, ultraviolet hold-up, anti-fouling behaviour and mechanical wear resistance for the stearate grade.
  • End of life: Yuan said the material can be degraded and will not linger the way PFAS does.

WHAT IS UNCONFIRMED

  • Price: No commercial cost versus C6 fluorochemical finishes has been published.
  • Weathering: Multi-season outdoor wear on a garment is not in the paper.
  • Food-can duty: Inner linings are an explored use, not a qualified food-contact system.

The honest near-term customer is a mill that already handles lignin and a finisher who must ship EU consumer clothing without PFHxA-related water-repellent chemistry. Construction-material coats are on WashU’s list too, and those textiles have a longer runway under the 2027 date for carpets, curtains and upholstery.

Avoided Harm Pegged at $1.1 Billion a Year

WashU worked with researchers at Texas A&M University, including co-author Susie Y. Dai, on a life-cycle and social-cost pass. Looking at global health and environmental harm from forever chemicals, the Texas group estimated that swapping PFAS for SLIP in waterproofing could avoid as much as $1.1 billion a year in societal damage.

That figure is an upper-bound model for waterproofing, not a receipt from a factory switch. It also assumes the film can take the jobs PFAS now holds in that slice of the market. Water-only uses fit. Grease, fire and high heat do not, until the next attributes land.

It’s not going to stay in the environment forever and it can be degraded.

Joshua Yuan, Lucy and Stanley Lopata Professor, Washington University in St. Louis

THE FUNGUS TEST

  • Clock: Two weeks of fermentation with a white-rot fungus in nutrient-poor medium.
  • Untreated particles: 31.9% lower average molecular weight.
  • Alkali-pretreated particles: 36.5% lower average molecular weight after 1M KOH for 30 minutes, then the same two weeks.
  • Read-through: The authors treat those drops as a floor rate for soil, with compost expected to run faster.

Yuan called the work a case of learning from nature and designing a material whose life cycle tracks natural polymers, so the film can break down without the harm PFAS leaves behind. The group is now trying to add oil and fire resistance and to plug the recipe into pulp mills and biorefineries that already produce lignin.

Frequently Asked Questions

What Is SLIP Made From?

SLIP is made by esterifying lignin with fatty acids and binding the particles with polylactic acid; the grade that beads water is lignin stearate, and the paper’s shorter grafts, octanoate and laurate, never reach a superhydrophobic film. The work was funded through NSF CURB (award EEC 2330245) and Department of Energy biomass grants to Yuan and Dai.

Does the EU PFHxA Clothing Rule Apply to Jackets Already in Stores?

Entry 79 does not apply to articles and mixtures that were placed on the market before 10 October 2026, so stock that cleared customs or shelves before that date can still be sold, while new consumer clothing, footwear and food-contact paper must meet the 25 ppb and 1,000 ppb caps. Category III personal protective equipment in listed risk classes, medical devices and construction textiles remain outside the clothing paragraph.

How Fast Does the Coating Break Down?

The published test used Phanerochaete chrysosporium, a white-rot fungus that grows between 25°C and 40°C, in a nutrient-poor flask for two weeks, which the authors call a conservative stand-in for soil. They argue compost would speed breakdown because it is richer, and they note that other lignin-eating bacteria could help in mixed environments.

Can SLIP Replace PTFE on Cookware?

No published version is pitched for bakeware, because the stearic chains begin to break down above 180°C in air, well below the service heat expected of PTFE-coated pans. The group’s own next steps are oil-proofing and fireproofing, which are the other jobs cookware and some packaging still ask of fluorochemistry.

How Is This Different From Wax or Silicone Water Repellents?

Wax and many silicone finishes lower surface energy as a smear; SLIP is a particle film whose geometry traps air, which is why Zuilhof compared it to the lotus effect rather than to a fluorinated chain. The PLA binder and the grafted lignin backbone are also designed to be eaten by ordinary wood-rot chemistry, which is the claim wax-on-cotton has never had to prove in the same way.

Harry is the editor of COVER 365, an independent publication he owns and runs, and a journalist of ten years who moved from reporting into editing. Anything the site reviews has been used before it is judged. A phone, a car, a game or a piece of travel gear is tested in ordinary conditions, its measured results are set against the maker's specification sheet, and where the two disagree the article says which one to trust and why. No product gets a verdict Harry has not earned by using it. Off the test bench, the same rule of primary evidence applies: business stories come from filings and results, science from the published paper, sports from the governing body's records, and news from statements and transcripts rather than second hand accounts. Coverage runs across technology, auto, gaming, lifestyle and travel as well as news, business, science, sports and entertainment, for readers in every part of the world. Every figure is checked before publication and corrected publicly under a stated policy when wrong. Reader mail is answered at support@cover365.in.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Trending